ACCESSORY FITTING INSTRUCTIONS

JAGUAR

I-PACE

CLICK & HANG UNIVERSAL HOOK

J9C2169

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
  • The click & hang universal hook and click and go system base unit must be installed to point rearward in the vehicle.
  • The click and hang universal hook does not restrain items placed on it. Items may come lose if the vehicle abruptly changes direction and may cause injury to the vehicle occupants.
  • Vehicle occupants are not permitted to sit behind the seat that the click and hang universal hook is installed to.
CAUTION
  • Do not exceed 1.5 kg load on the click and hang universal hook.
  • Take suitable care not to damage the click and hang universal hook if the second row seats are folded down.
  • When not in use the click and hang universal hook should be stored in the loadspace compartment.
NOTE
  • If your seat is installed with an integrated backrest base unit as illustrated, you do not need the click and go system base unit, item J9C2168.
Fitting Instruction
1

If your vehicle seats are installed with an integrated backrest base unit, raise and hold open the flap while installing the click and hang universal hook.

2
NOTE
  • Listen for an audible click to confirm that the click and hang universal hook is securely installed to the base unit.

Push the click and hang universal hook fully into position.

REMOVAL INSTRUCTIONS
1

Remove the click and hang universal hook.

  1. Depress the buttons.
  2. Pull out the click and hang universal hook.