ACCESSORY FITTING INSTRUCTIONS

JAGUAR

I-PACE

BUMPER PROTECTOR

T2H17216 / T2H24701

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
NOTE
  • T2H24701 gives better aperture coverage on X590 vehicles.
Fitting Instruction
1

Open the tailgate.

2

Open out the bumper protector.

  1. Unfold the side flaps.
3

Install the bumper protector.

  1. Make sure the velcro is facing the loadspace floor carpet.
4

Lay the bumper protector over the rear bumper.

5

Apply pressure to make sure that good contact is made with the bumper protector velcro and the loadspace floor carpet.