ACCESSORY FITTING INSTRUCTIONS

JAGUAR

I-PACE

ILLUMINATED JAGUAR FRONT GRILLE BADGE

J9C5988

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
CAUTION
  • Take extra care the illuminated Jaguar front grille badge cannot be installed on the vehicles with adaptive speed control system.
REMOVAL INSTRUCTIONS
1

Raise and support the vehicle on a suitable 2 post lift.

2

With assistance, remove the front bumper.

For additional information, please refer to the official Workshop Manual. Front Bumper (501-19)

3

Remove the blanking plug.

4

Remove the Jaguar front grille badge.

Fitting Instruction
1
CAUTION
  • An audible click is heard when the illuminated Jaguar front grille badge is located correctly.

Install the illuminated Jaguar front grille badge.

2

Check that the illuminated Jaguar front grille badge is fully seated and located correctly.

3

Connect the illuminated Jaguar front grille badge electrical connector.

4

With assistance, install the front bumper.

For additional information, please refer to the official Workshop Manual. Front Bumper (501-19)

5

Turn on the interior lights and make sure that the illuminated Jaguar front grille badge works correctly.