Open tailgate and remove parcel shelf.
Fold down second row seats.
Place the quilted loadspace liner base panel (A) into the loadspace. Align the front edge of the liner with the front edge of loadspace carpet.
Raise the quilted loadspace liner base panel sides and secure to the loadspace hooks.
Open the x2 velcro panels to allow the quilted loadspace liner base to sit flush on the loadspace floor.
Place the seat back panel (B) on the folded back seats and velcro to the base panel.
Fold in the base panel side rear flaps (A) in preparation for securing the seat back panel (B).
Raise the seat back panel (B) to secure it with the base side panel with provided velcro.
Raise the 2nd row seats and loop the elastic strap around the x3 metal headrest pillars. Then clip into place.
Make sure the back panel of the quilted loadspace liner is behind the 'Loadspace Partition - Full Height' or 'Loadspace Partition Net' and not in front of it.
Attach the tailgate trim covers (C) using the velcro to secure in place.
Align the tailgate front panel (D) with the tailgate and slide under the quilted loadspace liner base. Attach the front panel flap to the underside of the quilted loadspace liner base with the velcro.
If required, to access the D-loops open the x4 velcro panels.
Lift up the front panel (D). Secure using the buckles on both sides of the rear panel.
Install the parcel shelf and close tailgate.
