ACCESSORY FITTING INSTRUCTIONS

JAGUAR

E-PACE

UNION JACK TREADPLATES

J9C11681PVJ, J9C11681LAA

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
NOTE
  • Left side shown. Right side is similar.
REMOVAL INSTRUCTIONS
1
CAUTION
  • Take extra care not to damage the wiring harnesses.

Remove the existing front treadplate from the vehicle.

  1. Remove the hood release lever.
2
NOTE
  • This step may not be neccessary depending on vehicle variant.

Disconnect the electrical connector.

Fitting Instruction
1

Make sure all the clips are in place.

2

Install the treadplate.

3

Make sure all clips are inserted correctly.

4

Install the hood release lever.

  1. Install and tighten the bolt. Torque 5 Nm.