ACCESSORY FITTING INSTRUCTIONS

JAGUAR

E-PACE

FRONT ILLUMINATED TREADPLATES/PERSONALISED TREADPLATES

J9C11679PVJ / J9C11679LAA / J9C11680PVJ / J9C11680LAA / J9C30260PVJ / J9C30263PVJ / J9C30266PVJ

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
NOTE
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations for left side components, right side components are similar.
Description Part Number
Front Illuminated Treadplates (Ebony) J9C11679PVJ
Front Illuminated Treadplates (Lunar) J9C11679LAA
Front Personalised Illuminated Treadplates (Ebony) J9C11680PVJ
Front Personalised Illuminated Treadplates (Lunar) J9C11680LAA
Front Illuminated Treadplates - Right side - All markets (Ebony) J9C30260PVJ
Front Illuminated Treadplates - Left side - All markets except Japan (Ebony) J9C30263PVJ
Front Illuminated - Left side - Japan (Ebony) J9C30266PVJ
REMOVAL INSTRUCTIONS
1
CAUTION
  • Take extra care not to damage the wiring harnesses.

Remove the existing front treadplate from the vehicle.

  • Remove the hood release lever.
2
NOTE
  • This step may not be required depending on vehicle variant.

Disconnect the electrical connector.

Fitting Instruction
1

Make sure the clips are all in place.

2

Install the front illuminated treadplate.

  • Connect the electrical connector as illustrated.
3

Make sure all clips are inserted correctly.

4

Install the hood release lever.

  • Install and tighten the bolt. Torque: 5 Nm